The G&C Round 12V Premium roof ventilator kit provides a complete active ventilation solution for commercial vans, service vehicles, campervans and other vehicles with a suitable 12V electrical system. Its electric roof fan delivers up to 850 m³/h airflow and supports both air intake and extraction.
This Premium package includes a complete electrical connection kit with a three-position reversing switch, PWM speed controller, closable grey interior grille, passive floor vent and the installation accessories required for a suitable vehicle roof installation.
The G&C Round 12V ventilator provides active airflow even when the vehicle is parked. Use the supplied polarity-reversing switch to select intake, off or extraction. The PWM speed controller allows the fan speed to be adjusted to the required ventilation level.
The included passive floor vent can provide an additional air opening when fitted appropriately.
Special vehicle roof constructions may require additional fitting components.
Before cutting the roof, check the structure, reinforcement, cables and available installation space. The stated roof opening is Ø230 mm. Always follow the supplied template and installation instructions for the final cut-out.
Protect exposed metal edges against corrosion. Fit the mounting ring and rubber seal using the included sealant and mounting hardware as instructed. The spacer rings and soft foam filler help finish the space between the roof and interior headlining.
Install the closable grille, insect/snow filter and passive floor vent in suitable locations. Keep the airflow paths clear of insulation, trim and cargo.
Connect the fan to a properly fused 12V DC circuit. At 80 W, the calculated nominal current is approximately 6.67 A. Actual starting and running currents can differ; select the wiring and fuse according to the installation instructions.
The three-position reversing switch and stepless PWM speed controller are already part of the Premium package. They do not need to be ordered separately.
How does Premium differ from BASIC and PLUS?
Premium adds the electrical connection kit, reversing switch, PWM speed controller, floor vent and interior finishing accessories to the roof installation components.
What is the maximum airflow?
850 m³/h.
Can the airflow direction be reversed?
Yes, using the included reversing switch.
Is the speed controller included?
Yes, a stepless PWM controller is supplied.
Is the floor vent included?
Yes, a round passive floor vent of Ø129 mm.
Are sealant and fasteners included?
Yes, both are supplied.
Does the interior grille close?
Yes, the premium grey interior grille is closable.
What size roof cut-out is required?
Ø230 mm, to be checked against the supplied template.
Can this version be connected to 24V?
No, choose the dedicated 24V version.
Choose a complete roof ventilation package with up to 850 m³/h airflow, reversible operation and stepless speed adjustment. The electrical controls, floor vent, interior finishing components, sealant and installation hardware are included.